From Inspection to Installation: What to Expect With Sewer & Pipelining Services

Plumbers-Pipe-Installation

If you’ve had professional sewer service before, you know just how major these plumbing works can be. Sewer pipes can be tricky to repair, especially since they’re prone to corrosion and are hidden below the ground. One wrong move and the supposed repair can turn into a disaster. Hence, getting prepared before the work starts is essential to ensure a seamless, efficient process.

Let’s take a look at what to expect and how sewer and pipelining services go on.

Sewer Line Inspection

Every plumbing work starts with a thorough inspection. For sewer services, the inspection often takes between 30 minutes and an hour. Plumbers have a lot to check before the actual work begins. They’ll need to do a visual inspection across the full length of your sewer line. The condition of your pipes must also be assessed. They’ll also inspect the access points. Beyond the surface condition of your pipes, they will also need to look at their insides.

Plumbers often rely on video camera inspection to avoid missing any hidden issues. Only after the inspection can they plan how the actual sewer and pipelining service should proceed.

Cleaning and Preparation

Next, the prepping stage. This step is all about getting your pipes ready for lining. Plumbers will have to clean your sewer lines to ensure the new liner’s proper bonding. They will clear out any debris, clogs, or tree roots that may compromise the repair.

Cleaning your pipes often means using a hydro jet or a mechanical auger. The goal is to leave the pipe as smooth and open as possible. A clean pipe means a stronger, longer-lasting liner.

The Pipelining Process

This stage is where the real transformation happens, and it’s also where delicate work begins. While pipelining doesn’t involve digging up your yard, the process can still take time. The more damaged your pipes are, the longer it takes for the full process to complete. Here’s how pipelining usually proceeds:

  1. A flexible liner coated in resin goes into your existing sewer pipe.
  2. Once in place, the liner is inflated and molded to the inside of the old pipe.
  3. Then it’s cured, either with hot water, steam, or UV light, until it hardens into a brand-new pipe within your old one.

Post-Installation Inspection

After the liner is cured and in place, your plumber won’t just pack up and leave. One final inspection is crucial. Another round of video camera inspection will be done. This is to ensure proper molding, full sealing, and accurate alignment with the original pipe path.

The camera helps detect any wrinkles, air pockets, or incomplete curing that could affect the pipe’s performance later on. Your plumber will also double-check that no debris was left behind during the process. Only when your plumbers are sure the new liner is free of defects can they deem the service complete and successful. 

How Long Does The Whole Process Last?

In most cases, complete sewer and pipelining services can take a few hours to a couple of days. The actual installation of the new liner only takes a few hours. This includes the insertion of the new material and curing it. However, some jobs will take up more time due to several factors. Here are some considerations that can extend the length of the process.

  • Pipe length and condition: The longer the pipe and the more severe the damage, the longer and more delicate the prep work will be. This translates to an extended and slower work pace.
  • Cleaning needs: If there’s a lot of buildup, roots, or blockages, your plumber will need more time to clear the line.
  • Curing method: Some liners cure with steam or hot water in just a couple of hours. Others use UV light, which can be even faster.
  • Accessibility: Tight spaces or limited access points can slow things down a bit.

Even with these factors, pipelining is still one of the fastest, least disruptive ways to repair a sewer line. No trenching. No digging up your yard. Just a smooth, efficient process that gets your plumbing back in shape fast.

Get Fast Sewer and Pipelining Services With Mr. Drippy Plumbing

Sewer pipelining remains one of the best choices for renewing your compromised pipelines. If you dread the usual mess of traditional repairs, this method takes that concern away. Just make sure you’re pairing with a plumber with the right expertise to maximize its benefits.

At Mr. Drippy Plumbing, we’ve been specialising in trenchless pipelining solutions for years. We are certified NuFlow trenches pipelining experts, the leading name in pipelining and relining solutions. With us, you’re guaranteed a fast, mess-free, and problem-free installation.

Call us now to book your service!

Mr. Drippy Logo

Emergency Plumbing?
(205) 683-4436

Schedule Service

"*" indicates required fields